Eco-Friendly Air Source Heat Pump for Industrial Drying Solutions

Product Description

Green energy Industrial Usage Air Source Heat Pump Drying Equipment For Wood Powder Sludge Drying
Product Description

The heat pump drying unit is composed of a heat pump main engine, a cabin internal circulation system and an intelligent control system. The operation control of the whole drying system is completed on the controller, and the temperature and humidity of the drying room can be accurately controlled in multiple stages.

The Air Source Heat Pump Dryer consists of a circulation system composed of a compressor, condenser, throttle valve, and evaporator. Its specific operating process is as follows:

1. Compression: At the beginning of the operation, the refrigerant is pressurized by the compressor. At this time, the refrigerant turns into a high-temperature and high-pressure gas.

2. Heat Release and Air Heating: The high-temperature and high-pressure refrigerant gas enters the condenser to release heat. The heat released is sent to the drying kiln by the circulating fan to heat the air in the drying kiln.

3. Evaporation of Moisture: With the increase in air temperature, the moisture in the drying material will gradually evaporate.

4. Dehumidification: The evaporated water vapor will be dehumidified by the fresh air dehumidification system.

5. Subsequently, the refrigerant that releases heat in the heat exchanger (condenser) becomes a low-temperature and low-pressure liquid after passing through the throttle valve and oil liquid separator.

6. Heat Absorption: The liquid refrigerant enters the evaporator, absorbing heat from the atmosphere.

7. Feedback: The compressor absorbs the refrigerant (which has become low-temperature and low-pressure gas) that has absorbed heat, and compresses it again, forming a cycle.

In this way, the Air Source Heat Pump Dryer can constantly absorb heat from the air and release it in the drying kiln to achieve a drying effect. And only a small part of electrical power is required in this process, the rest of the heat comes from the air. So, it's a very energy-efficient and highly effective drying method.
 

Item Name	Split Air Source Heat Pump Drying Unit
Material	Carbon Steel, Stainless Steel
Advantages	Low Noise, Stable Operation
Application	Drying techniques applicable to various industrial sectors, including lost foam, textiles, water-based paint, activated carbon, electronic components, mesh belt automatic drying for electroplated parts, ceramics, and fire-resistant materials

About Refrigerants

Background: Global Warming Potential (GWP) and Ozone Depletion Potential (ODP) are important indicators for evaluating the environmental friendliness of refrigerants. Choosing refrigerants with low GWP and zero ODP can help reduce adverse impacts on the atmospheric layer.

Yijiaren can use refrigerants R410A, R290, R32, and R134A, each with different refrigeration capabilities and efficiencies. We can select the appropriate refrigerant according to specific refrigeration needs.

Advantages

The heat pump dryer uses an evaporator to absorb the heat from external air, or recycles the waste heat from the drying process. After the compressor operates, the energy is transported (transferred) to the drying box, continuously cycling heating, dehumidifying, removing water, and achieving drying. Heat pump drying will reduce consumption and improve product quality. High-temperature units adopt special processes and special refrigerants, enabling the compressor to produce hot water at 75ºC~85ºC while maintaining good operating conditions, and the thermal efficiency is still more than 2.5.

 

Main functions:

 

• Utilizes a high-temperature heat pump compressor.
• The heat pump drying equipment performs item baking, and the unit solves the waste gas pollution caused by combustion.
• Modular design for free combination.
• The electronic expansion valve throttles to control the flow of refrigerant, ensuring the unit operates well throughout the year.
• Automatically adjusts the heat dissipation fan speed, reliable operation, and extends the unit's lifespan.

Working principle

Main Configuration

1. Heat Exchanger

Hydrophilic Membrane Aluminum Foil Finned Heat Exchanger: The heat exchange is carried out using a blue hydrophilic membrane aluminum foil finned heat exchanger, which boasts superior hydrophilic performance. The hydrophilic layer remains non-oxidized and intact over prolonged periods of use, preventing frost and ice buildup. Employing internal threaded tubes extends the time the working fluid spends traversing the evaporator, enhancing heat exchange and saving energy by approximately 15%.

2. Electronic Expansion Valve

Utilizing the Japanese original Luomi 500 electronic expansion valve: The Luomi 500 expansion valve accurately controls the refrigerant flow, resulting in energy savings and reduced power consumption. It features orderly energy adjustment from 0 to 500 levels, ensuring stable system operation and significantly reducing failure rates.

3. Compressor

Using the American Turbolon Jet Enthalpy Compressor (for heat pump use):

1. The jet enthalpy compressor ensures operation at ultra-low temperatures down to -25°C.
2. It improves energy efficiency by approximately 30%.
3. With an extended lifespan, the compressor can last around 15 years

4. Condenser
Six-threaded internal and external threaded tube condenser: Employing a new structure condenser formed by the rotation of six internal and external threaded tubes based on American technology. This design induces the rotational flow of water along the copper tube's inner wall, doubling the heat exchange process and increasing the heat exchange area by a factor of two. This significantly enhances heat exchange speed and efficiency while prolonging unit lifespan and reducing maintenance frequency.

 

Configuration Features
A split side-blowing model, suitable for installation at the top of the drying room, does not occupy other spaces in the factory. 4.3-inch touchscreen display, high-temperature compressor, high-temperature refrigerant, the outlet air temperature can reach 80 degrees, industrial-grade motherboard, high-temperature resistance, corrosion resistance, standard famous brand electrical components, durable, high-end explosion-proof fan, can operate in high temperature and high humidity environment, thickened sheet metal, piano baking paint process, stable and beautiful.
Previous Engineerings

Industrial Drying Applications

We can customize the drying room according to your needs, with an intelligent automatic control system that allows you to control temperature and humidity at will, ensuring the quality of drying.
About Us

Jiangsu Obuy New Energy Development Co., Ltd.
- Professional Commercial Heat Pump for Swimming Pool Cooling and Dehumidifying

Jiangsu Obuy New Energy Development Co., Ltd., known by the brand name "Yijiaren," is an environmentally friendly industrialized enterprise specializing in the research, production, and sales of new energy products. Our Professional Commercial Heat Pump for Swimming Pool Cooling and Dehumidifying is one of our flagship products.

Designed to provide efficient and eco-friendly solutions, our heat pump utilizes air source technology to cool and dehumidify swimming pools. With its advanced features and reliable performance, it is the ideal choice for commercial applications.

Key Features:

• Energy-efficient: Our heat pump uses air source technology to extract heat from the surrounding air, resulting in significant energy savings.
• Environmentally friendly: By utilizing renewable energy sources, our heat pump helps reduce carbon emissions and minimize environmental impact.
• Reliable performance: With its robust design and high-quality components, our heat pump delivers consistent and reliable performance, ensuring optimal cooling and dehumidification.
• Easy installation: Our heat pump is designed for easy installation, allowing for hassle-free integration into existing swimming pool systems.
• Low maintenance: Our heat pump requires minimal maintenance, saving you time and money in the long run.

Whether you own a hotel, fitness club, or any other commercial facility with a swimming pool, our Professional Commercial Heat Pump for Swimming Pool Cooling and Dehumidifying is the perfect solution to maintain a comfortable and enjoyable swimming environment.

Choose Jiangsu Obuy New Energy Development Co., Ltd. for energy-efficient, environmentally friendly, and reliable heat pump solutions. Contact us today to learn more about our products and how they can benefit your business.

Cooperative Clients

Our Factory

Certificates

Why Choose Us?

1. Our well-trained and experienced team offers exceptional patience and service.

2. A sample can be offered, with a sample charge and courier fee by the buyer's side.

3. We have full stock and can deliver within a short time. Many styles for you to choose. 

4. OEM and ODM orders are accepted, any kind of logo printing or design are available.

5. Over 8000 engineerings with great success provided by YIJIAREN.

6. We highly value your feedback upon receiving the goods and are committed to resolving any issues promptly.

7. We ensure the confidentiality of your sales area, design concepts, and all private information.

8. We have rich experience in designing, manufacturing and selling Solar Water heaters and heat pumps, we cherish every order from our honor.

9. You're warmly invited to visit our factory at your convenience.

Packaging&Shipping

 

FAQ

1. Q: What is your company business, brand, and product?

     A: We engaged in manufacturing, R&D, Quality control and maintenance for solar water heater system, air source heat pump, heat pump components and accessories accordingly.

2. Q: Can we add our brand?
     A: Yes. We brand "YIJIAREN" for our solar water heater system and air source heat pumps, however, we provide OEM and ODM service.

3. Q: What certificates do you have?
      A: We have ISO9001, ISO14001.

4. Q: How can we be your agent/distributor/exclusive agent?
      A: At least one year of cooperation is required as a base of agent/distributor/exclusive agent.

5. Q: What after-sales service you provide?
     A: We provide 24 months of warranty service according to our warranty policy.

6. Q: What is the leading/production time?
      A: Generally it is 3-7 working days if the goods are in stock. or it is 15-25 working days if the goods are not in stock, it is according to quantity.

7. Q: Why we choose you?
      A: We offer customized services tailored to your specific requirements, including technical consulting and system design. With over 15 years of expertise in solar water heaters and air source heat pumps for commercial and industrial heating and cooling systems, we provide comprehensive solutions for all engineering projects. By continuous quality improvement, we guarantee the clients high-quality products, and maintain a healthy, stable and sustainable development. We eagerly anticipate establishing a long-term partnership with you.

The greater the number of details you share, the better we can tailor a suitable drying engineering solution for your needs.
Get in touch with us and schedule a Factory Tour!